Before Testing; Checking The Meter Display; Coding The Meter - OneTouch Ultra Owner's Booklet

Before Testing

Checking the Meter Display

Each time you turn on the OneTouch
Meter either by inserting a test strip or
pressing the
display will appear briefly. This tells you that
the system is performing several self-checks to
confirm that the meter is working properly.
To check that all display segments are working, with the meter off, press
the button and immediately hold the

Coding the Meter

Code numbers are used to calibrate the OneTouch
with OneTouch
the meter before using it for the first time and then every time you
change to another vial of test strips. Each time you test, check to be
sure that the code number on the meter display matches the
code number on the test strip vial.
m
CAUTION:
strip vial is essential to obtain accurate results. Each time you test, check to
make sure the code on the meter and the code on the test strip vial match.
10
button, all segments of the
Ultra Test Strips for accurate results. You must code
® ®
Matching the code on the meter and the code on the test
Ultra
® ®
button down.
Ultra Meter
® ®