Sony RDR-GX700 Operating Instructions Manual page 99

The recorder starts playing the disc
automatically.
, The DVD VIDEO features an auto playback
function.
Playback stops automatically.
, If the disc has an auto pause signal, the recorder
stops playback at the auto pause signal.
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the disc, you may not be able to do
some of the operations above. See the instruction
manual supplied with the disc.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the disc
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO's menu.
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO's menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when "
does not appear on the TV screen (page 54).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO's
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play (page 60).
Recording/Timer recording/Editing
The programme position cannot be changed
from the channel you are recording.
, Set the TV's input source to "TV."
Recording does not start immediately after you
press z REC.
, Operate the recorder only after "LOAD",
"FORMAT," or "INFOWRITE" disappears
from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder's internal clock stopped due to a
power failure that lasted for more than 1 hour.
Reset the clock (page 86).
, The channel was disabled after the timer
recording was set. See "Channel Setting" on
page 83.
, Disconnect the mains lead from the mains, and
connect it again.
, "PDC/VPS Scan Off" was selected in the
TOOLS menu (page 43).
, The programme contains copy protection signals
that restrict copying.
, Other timer setting overlapped the timer setting
(page 46).
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The recorder was in the process of DV Dubbing
(RDR-GX700 only).
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
"
Recording does not stop after you press x
STOP.
, Open the remote's cover and press x REC
STOP.
,continued 99