Sony RDR-GX350 Operating Instructions Manual page 35

4
Select "Title Name," and press
ENTER.
The display for entering characters
appears.
The current name is displayed at the
input row.
Input row
5
Move the cursor to the point where you
want to insert the character using
m/M.
To erase all of the characters, press and
hold CLEAR for 2 seconds or more.
6
Select "Upper case" or "Lower case"
using ./>.
The characters for the selected type are
displayed.
The type of characters will change
according to the language you select in
"Easy Setup."
7
Press </M/m/, to select the
character you want to enter, and press
ENTER.
The selected character appears at the
input row.
To insert a space, press X (or select
"Space," and press ENTER).
8
Repeat steps 6 and 7 to enter the
remaining characters.
To erase a character, move the cursor to
the character at the input row, and press
CLEAR (or select "Clear," and press
ENTER).
To insert a character, move the cursor to
the right of the point where you want to
insert the character. Then select the
character, and press ENTER.
To erase all of the characters, press and
hold CLEAR for 2 seconds or more.
9
Press x (or select "OK," and press
ENTER).
To cancel the setting, press
O RETURN.
35