Checking The Disc Status While Recording - Sony RDR-GX350 Operating Instructions Manual

3
Press REC MODE repeatedly to select
the recording mode.
Each time you press the button, the
display on the TV screen changes as
follows:
* Available when "Manual Rec. Mode" is set
to "On (go to setup)" in the "Recording"
setup (page 84).
For more details about the recording
mode, see page 41.
4
Press z REC.
Recording starts.
Recording stops when the DVD is full.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
To pause recording
Press X REC PAUSE.
To restart recording, press the button again.
To watch another TV programme while
recording
If your TV is connected to the T LINE 3 –
TV jack, set your TV to the TV input using
the TV/DVD button and select the
programme you want to watch. If your TV is
connected to the LINE 2 OUT or
COMPONENT VIDEO OUT jacks, set the
TV to TV input using the TV t button
(page 18).
b
Notes
• If you press the [/1 button while recording, the
recorder stops recording and turns off.
• After pressing the z REC button, it may take a
short while to start recording.
• You cannot change the recording mode while
recording.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus
programme while recording another PAY-TV/
Canal Plus programme.
30
Checking the disc status while
recording
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
A Recording status
B Current selected recording mode
(maximum DVD recording time)
(page 41)
C Title number and recording elapsed
time
D Remaining time
E Station name and programme position
number
F Audio setting for the current
programme
G Recording restrictions for the current
programme
H TV mode or DVD mode (page 19)
I Disc type/format
Press DISPLAY to turn off the display.