Changing Programme Positions Of The Recorder Using The Remote; Step 6: Easy Setup - Sony 4-131-978-11(1) Operating Instructions Manual

To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV
mode and DVD mode. Press the TV/DVD
button when in stop mode or no menu
appears on the TV screen. Point your remote
at the recorder when using this button.
TV mode: switch to this when you use the
TV's tuner mainly. When you start
playback, the input source for the TV is set
to the recorder automatically.
DVD mode: switch to this when you use the
recorder's tuner mainly.
Changing programme
positions of the recorder using
the remote
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press "5," "0," then press

Step 6: Easy Setup

Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
Be careful not to disconnect the cables or
exit the "Easy Setup" function during this
procedure.
O RETURN
.
1
2
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the
recorder appears on your TV screen.
Follow the on-screen instructions to
make each setting, and press
, to proceed.
Language (language)
Select a language for the on-screen
displays using M/m.
Country
Select your country/region using M/m.
Digital Source
Select the input source for digital
broadcasting. When you receive
analogue broadcasting only, press ,
several times to proceed to the "Auto
Channel Setting" setting.
"Antenna": Select this to receive digital
terrestrial television (DVB-T).
[/1
</M/m/,,
TV [/1
or
23
,continued