Local Operator Interface (Loi); Field Communicator Interface - Emerson Rosemount 8732EM Quick Start Manual

Quick Start Guide
6.2

Local operator interface (LOI)

To activate the optional LOI, press the DOWN arrow.
Use the UP, DOWN, LEFT(E), and RIGHT arrows to navigate the menu
structure.
A complete map of the LOI menu structure is shown in the product reference
manual.
The display can be locked to prevent unintentional configuration changes.
The display lock can be activated through a HART communication device, or
by holding the UP arrow for three seconds and then following the on-screen
instructions.
6.3

Field Communicator interface

Use the menu paths to configure basic setup of the transmitter using a field
communicator.
Table 6-1: Basic setup menu paths
Function
Basic Setup
Flow Units
PV Upper Range Value
(URV)
PV Lower Range Value
(LRV)
Calibration Number
Line Size
Tag
Long Tag
Overview
28
Menu path
Configure → Manual Setup → Basic Setup
Configure → Manual Setup → Basic Setup → Flow
Units
Configure → Manual Setup → Basic Setup → AO →
URV
Configure → Manual Setup → Basic Setup → AO →
LRV
Configure → Manual Setup → Basic Setup → Setup →
Calibration number
Configure → Manual Setup → Basic Setup → Setup →
Line Size
Configure → Manual Setup → Device Info →
Identification → Tag
Configure → Manual Setup → Device Info →
Identification → Long Tag
Overview
Rosemount 8732EM Transmitter with HART Protocol
March 2019