Connecting A Digital Video Camera Recorder - Sony PCGA-DDRW2 Operating Instructions Manual

5

Connecting a Digital Video Camera Recorder

Using the Click to DVD
Video Camera Recorder to the drive and use video from the Digital Video
Camera Recorder to create DVD videos. The procedure for connecting a
Digital Video Camera Recorder to the drive is different than that for
connecting a Digital Video Camera Recorder to a computer.
The Digital Video Camera Recorder that you can connect to the drive must
be a Sony Digital Video Camera Recorder that:
• Can record video in DV or MICROMV
• Is equipped with a DV output terminal and can be connected to a
computer using an i.LINK cable (also known as a DV cable).
Note
The drive does not support analog format and some types of Digital Video Camera
Recorder formats.
The following models cannot be used (as of May, 2004):
– DCR-VX1000
– DCR-VX700 (versions with an upgraded DV terminal)
Use the supplied Click to DVD software to create DVD videos using the
video captured with your Digital Video Camera Recorder. To install the
supplied software, see "Installing the Software" (page 28).
GB
18
Click "Start", and then click "My Computer" to verify that
(E: or other drive name) has been added in the "My
Computer" window.
TM
software provided, you can connect a Digital
®
format.