Sony PCGA-DDRW2 Operating Instructions Manual page 15

1
Turn on the notebook.
2
Insert the L-shaped plug of the supplied peripheral
cable into the matching connector on the rear of the
drive, and secure the plug with the screw.
Turn the screw until it fits snugly.
3
Insert the straight plug of the supplied peripheral cable
into the i.LINK connector on the notebook and into the
peripheral device DC OUT connector.
The green POWER indicator of the drive lights up, and the
drive is detected and identified by the notebook.
z
Hint
When this drive is connected to your notebook for the first time, it takes a
moment for the notebook to detect the drive.
i.LINK connector
Peripheral device DC OUT
connector
Continued on next page
GB
15