Sony PCGA-DDRW2 Operating Instructions Manual page 13

Notes
• If your computer is not equipped with a peripheral device DC OUT connector, use the
supplied i.LINK cable to connect the drive to the computer. For details about this
connection, see page 16.
• Whenever an i.LINK device is connected, disconnected, or powered on or off, the
computer performs processing that is referred to as a "bus reset". If this happens while
data is being read or written, data could be erased or corrupted. Before connecting or
disconnecting this drive, be sure to close any active applications.
• Use this drive on a level and stable surface.
Continued on next page
GB
13