Slide Sleeve And Dust Channel Installation; Figure 020-9: Connection Piece Removal - Miele S 500 Series Technical Information

S 500 & S 600 Canister Vacuums
Technical Information

Figure 020-9: Connection Piece Removal

10. Press the slide sleeve out of the dust channel.
4.8

Slide Sleeve and Dust Channel Installation

1. Install the casing top catch; see Section 020-4.12 or 020-4.13.
2. Install the built-in socket (if applicable). See Section 020-4.15.
3. Install the connection piece (if applicable). The connection piece must be
installed firmly in the slide sleeve. See Figure 020-9, Item 1.
4. Pre-assemble the slide sleeve and dust channel; see Figure 020-10.
33