Service; Storage Slot Removal; Bumper Strip Removal; Seal And Sealing Ring Removal - Miele S 500 Series Technical Information

S 500 & S 600 Canister Vacuums
4

Service

4.1

Storage Slot Removal

1. Remove the casing top. See Section 020-4.2.
2. Remove the cap. See Section 030-4.1.
3. Remove the cover frame. See Section 020-4.5.
4. Remove the retaining screw (Figure 010-3, Item 1) from the storage slot.
5. Remove the storage slot with bumper strip from its holder; see Figure 010-3,
Item 2.
6. Remove the storage slot from the bumper strip.

Figure 010-3: Storage Slot Removal

Note:
When re-installing, ensure that the storage slot and the bumper strip are
seated correctly.
4.2

Bumper Strip Removal

1. Remove the storage slot. See Section 010-4.1.
2. Remove the handle strip.
3. Remove the bumper strip.
Note:
When re-installing, ensure that the bumper strip (and storage slot) are
seated correctly.
4.3

Seal and Sealing Ring Removal

1. Remove the casing top. See Section 020-4.2.
2. Remove the cap. See Section 030-4.1.
3. Remove the cover frame. See Section 020-4.5.
4. Remove the motor wiring harness (Figure 010-4, Item 3) from its holder.
19
Technical Information