Automatic Transmission
The automatic transmission
selects individual gears auto
matically, dependent upon
•
Selector lever position
• Accelerator position
• Vehicle speed
Important!
When parking the car and before
working on the vehicle with the
engine running, firmly depress the
parking brake pedal and shift the
selector lever into " P" .
Driving
The selector lever is automatically
locked while in position " P" . To
move the selector lever out of
position "P " , the service brake
pedal must be firmly depressed
before the shift lock will release.
Shift selector lever to the desired
position only when the engine is
idling normally and the service
brake is applied. Do not release
the brake until ready to drive. The
vehicle may otherwise start creep
ing when the selector lever is in
drive or reverse position.
Warning!
It is dangerous to shift the se
lector lever out of "P" or "N"
if the engine speed is higher
than idle speed. If your foot is
not on the brake pedal, the
car could accelerate quickly
forward or in reverse. You
could lose control of the car
and hit someone or some
thing. Only shift into gear
when the engine is idling
normally and when your right
foot is firmly on the brake
pedal.
Accelerator position
Partial throttle = early upshifting
= normal acceleration
Full throttle = later upshifting =
rapid acceleration
Kickdown (depressing the accel
erator beyond full throttle) =
downshifting to a lower gear =
maximum acceleration. Once the
desired speed is attained, ease up
on the accelerator - the transmis
sion shifts up again.