Adjusting Headlam p
Correct headlamp adjustment is
extremely important. To check and
readjust a headlamp do the
following:
•
Park unloaded vehicle on level
surface. Check surface with
carpenter's level.
•
Remove cover above head
lamp. Move retaining clamps
(5) aside and remove cover.
Note:
Horizontal headlamp aim normally
never changes and needs read
justment only after repair to the
body or a headlamp unit. There
fore, do not turn the horizontal
adjustment screw (1), if number 0
on scale (11) aligns with marker
( 12).
106
Vertical headlamp aim:
Turn adjusting screw (2) until the
bubble in level (10) is in center of
the marking (bold line).
P54-0099 B13A
Horizontal headlamp aim:
Turn adjustment screw (1) until the
number 0 on scale (11) aligns with
marker (12).
•
Reinstall cover and fasten with
retaining clamps (5).
•
Reinstall cover above
headlamp.