Mercedes-Benz 600 SEL 1993 Owner's Manual page 107

Replacing bulb:
When replacing halogen bulbs do
not touch glass portion of bulb
with bare hands. Use plain paper
or a clean cloth.
Warning!
Halogen lamps contain
pressurized gas. A bulb can
explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Bulb for high and low beam
HB2 (60/55 W)
Bulb for fog lamp
YC (H3) (55 W)
Remove cover above headlamp.
Move retaining clamps (5) aside
and remove cover. Pull off electri­
cal connector (8) respectively (9).
Unhook clamping ring and pull out
bulb together with clamping ring.
Remove bulb.
Insert new bulb (seating properly
in cutouts of bulb socket), mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall cover and fasten with
retaining clamps (5).
Reinstall cover above headlamp,
and check lamp for proper
operation.
Turn Signal, Parking, Side
Marker and Standing Lamp
(1157 [2 1 /5 W /3 2 /3 cp] bulb)
Replacing bulb:
Squeeze latch (6) together and lift
complete lamp assembly out to
front of vehicle. Twist bulb socket
(7) counterclockwise and pull out.
Push bulb into socket, turn
counterclockwise and remove.
Insert new bulb in socket, push in
and twist clockwise. Reinstall bulb
socket. Reinstall lamp assembly
until properly seated and fasten
latch (6).
105