Speaker Set Up - Sony DVP-S525D Operating Instructions Manual

Notes on playing the DTS sound tracks on a CD
• Do not play the DTS sound tracks without connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO
SETUP" is set to "OFF" in the setup display, affecting your ears
or causing the speakers to be damaged.
• The DTS indicator on the front panel does not light up even if
the player outputs DTS signal via the DIGITAL OUT OPTICAL
and COAXIAL connectors.
• Set the sounds to "STEREO" when you play the DTS sound
tracks on a CD. (See "Changing the Sounds" on page 31.) If
you set the sounds to "1/L" or "2/R," no sounds will come out
from the DIGITAL OUT OPTICAL and COAXIAL connectors.
Notes on playing the DTS sound tracks on a DVD
• No sounds will come out from the LINE OUT (AUDIO) and
PHONES connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to
"ON" in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set "DTS" in "AUDIO SETUP" to "OFF," no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
• The DTS indicator on the front panel display lights up when
you play DTS sound tracks.

Speaker Set Up

Select "SPEAKER SETUP" after pressing SET UP.
To obtain the best possible surround sound, first specify
the size of speakers you have connected and their distance
from your listening position, then set the balance and
level. Then use the test tone to adjust the speaker
volumes to the same level.
For the speaker hook ups, see pages 14 to 15.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press
To quit, press
SETUP
pSIZE
Selects the size of the speakers to be connected.
• FRONT
— LARGE: Normally select this.
— SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
subwoofers.
• CENTER
— NONE: If you will not connect a center speaker,
select this.
— LARGE: Normally select this.
— SMALL: When the sound cracks, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
some other speakers .
• REAR
— NONE: If you will not connect a rear speaker, select
this.
— LARGE: Normally select this.
— SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
some other speakers .
• SUBWOOFER
— NONE: If you do not connect a subwoofer, select
this. This activates the Dolby Digital bass redirection
circuitry and outputs the LFE signals from the front
speakers.
— YES: If you connect a subwoofer, select this to output
the LFE (low frequency effects) channel from the
subwoofer.
OFF
LARGE
LARGE
LARGE
YES
, then .
ENTER
.
53