Tv Hookups - Sony DVP-S335 Operating Instructions Manual

TV Hookups

This connection is for listening to the sound through TV
speakers (L:left, R:right). Refer to the instructions
supplied with the component to be connected. You cannot
connect this player to a TV without a SCART (EURO AV)
connector or a video input connector.
z
You can enjoy surround sound with built-in TV speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of built-in TV speakers without using actual rear
speakers (VES TV: Virtual Enhanced Surround TV). For details,
see page 36.
CD/DVD player
AUDIO OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
R L COAXIAL OPTICAL
WOOFER
To T LINE-1
(RGB)-TV
: Signal flow
8
LINE-1 (RGB) - TV
DIGITAL OUT
VIDEO OUT S VIDEO OUT
To i LINE-2
Required cords
SCART (EURO AV) connecting cord (not supplied) (2)
Be sure to make connections firmly to avoid hum and noise.
Refer to the instructions supplied with the TV to be connected.
Notes
• When you set "LINE" to "S VIDEO" or "RGB" under
"CUSTOM SETUP" in the setup display, use a SCART (EURO
AV) connecting cord that conforms to each signal.
• When you connect using the SCART (EURO AV) connecting
cord, confirm that the TV corresponds to S VIDEO or RGB.
Refer to the instructions supplied with the TV to be connected
as well.
LINE-2
VCR
To SCART
(EURO AV)
output
TV
To SCART
(EURO AV)
input
To an AC outlet