Settings For The Sound (Audio Setup) - Sony DVP-S335 Operating Instructions Manual

x TRACK SELECTION
Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats (PCM, DTS, MPEG AUDIO or
Dolby Digital format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.
Notes
• When you set this item to "AUTO", the language may change
depending on the "AUDIO" settings in "LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than the
"AUDIO" settings in "LANGUAGE SETUP" (page 49).
• If you set "DTS" in "AUDIO SETUP" to "OFF", the DTS sound
track is not played even if you set this item to "AUTO" and the
highest-numbered channel audio is recorded in DTS format.
• If PCM, DTS, MPEG AUDIO and Dolby Digital sound tracks
have the same number of channels, the player selects PCM,
DTS, Dolby Digital and MPEG AUDIO sound tracks in this
order.
• Depending on the DVD, the audio channel with priority may
be predetermined. In this case, you cannot give priority to the
DTS, MPEG AUDIO or Dolby Digital format by selecting
"AUTO."
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound according
to the playback conditions.
The default settings are underlined.
Select "AUDIO SETUP" in the setup display.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
To set, press
To quit, press
DISPLAY
x AUDIO ATT (attenuation)
If the playback sound is distorted, set this item to "ON."
The player reduces the audio output level.
Selects the setting of the output from the AUDIO OUT
and LINE-1, 2 connectors according to the audio
equipment to be connected.
• OFF: turns off the audio attenuation. Normally select
this position.
• ON: reduces the audio output level so that no sound
distortion occurs. Select this when the playback sound
from the built-in TV speakers is distorted.
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors.
x AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down
when playing a DVD. This function works only when
you play a DVD which has the AUDIO DRC function.
This affects the output from the DIGITAL OUT connectors
only when "DOLBY DIGITAL" is set to "D-PCM" and
"MPEG" is set to "PCM" in "DIGITAL OUT," and it
affects the output from the AUDIO OUT and LINE-1, 2
connectors.
• STANDARD: Normally select this position.
• TV MODE: makes the low sounds clear even if you turn
the volume down. It is especially recommended when
you listen to the sound using the speakers of the TV.
• WIDE RANGE: It gives you the feeling of being at a live
performance. When you use high quality speakers, it is
more effective.
Note
When you play DVDs without the AUDIO DRC function, there
may be no effect on the sound.
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
PCM
OFF
, then .
ENTER
.
55