Customer & Equipment Details - Boss MX1-3HL Operation & Maintenance Manual

Customer Details
Please fill in information future reference:
Company:
Address:
Post Code:
Equipment Details
Details of model and serial number may be found on the label
Model:
Purchase date:
Note:
It is highly recommended to have this equipment commissioned by a BOSS approved engineer. Any damage or
loss incurred through incorrect commissioning by an unapproved engineer will not be covered by the warranty.
If you wish for BOSS to arrange this please contact us. (See contact details)
Please see the warranty section for details.
Remember to fill in details for future use for re-commission unit.
Do not use this equipment to fill a system, use a WRAS approved filling loop for initial filling.
Mechanical equipment does not have the required electrical monitoring for ethical system filling
operations. Under no circumstances must mini units be used to fill a system of any size.
We reserve the right to change designs and technical specifications of our products
E-mail:
A suitable safety relief valve must be fitted to the system.
www.bssindustrial.co.uk
Contact:
Tel No:
Fax No:
Serial No:
Purchase From:
.
Rev 2.1 Oct-15 Page 2 / 28