Resuming Playback From The Point Where You Stopped The Disc (Resume Play/Multi-Disc Resume) - Sony DVP-NS32 Operating Instructions Manual

Resuming Playback from
the Point Where You
Stopped the Disc
Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1
While playing a disc, press x to stop
playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Note
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead (CD or DATA CD/
DATA DVD only).
• When playing a DVD-RW in VR mode, the point
where you stopped is cleared when the disc tray is
opened or the mains lead is disconnected.
• When playing a CD, the point where you stopped
is cleared when the disc tray is opened or the
mains lead is disconnected.
(Resume
• When playing a DATA CD, the point where you
stopped is cleared when the player enters standby
mode, the disc tray is opened, or the mains lead is
disconnected.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play
and Programme Play.
Storing the point where you
stopped the disc (Multi-disc
Resume) (DVP-NS33/NS52P only)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the seventh disc, the resume playback
point for the first disc is deleted.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• To turn off the Multi-disc Resume function, set
"MULTI-DISC RESUME" in "CUSTOM
SETUP" to "OFF" (page 68). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• "MULTI-DISC RESUME" in "CUSTOM
SETUP" must be set to "ON" (default) for this
function to work (page 67).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play
and Programme Play.
• If "MULTI-DISC RESUME" in "CUSTOM
SETUP" is set to "ON" and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
27