Connecting To Audio L/R Input Jacks - Sony DVP-NS32 Operating Instructions Manual

Connecting to audio L/R input
A
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio/video cord
(not supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 44)
TV: Dynamic Theatre, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
Connecting to a digital audio
B
input jack
If your AV amplifier (receiver) has a Dolby*
Digital, DTS*
a digital input jack, use this connection.
Connect using a coaxial or optical (DVP-
NS52P only) digital cord (not supplied).
Yellow
Coaxial cord
White (L)
Red (R)
Optical cord
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG
audio (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
"Dolby," "Pro Logic," and the double-D symbol
are trademarks of Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 22).
If your AV amplifier (receiver) has an MPEG
audio decoder function, set "MPEG" to "MPEG"
in Audio Setup (page 69). Otherwise, no sound or
a loud noise will come from your speakers.
• The surround sound effects of this player cannot
be used with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 22).
2
or MPEG audio decoder and
,continued
1
21