Section 3 Basic Operation; Turning On The Transceiver; D Turning On The Transceiver; D Adjusting The Audio Level - Icom dPMR446 Operating Manual

3
BASIC OPERATION

Turning ON the transceiver

D Turning ON the transceiver

NOTE: Before using the transceiver for the fi rst time,
the battery pack must be fully charged for optimum
life and operation� See the BASIC MANUAL for
details�
Rotate [VOL] to turn ON the transceiver�
• The battery voltage or the opening text may be
displayed, depending on the presetting.

D Adjusting the audio level

When receiving a call, rotate [VOL] to adjust the audio
output level�

D Entering the password

If the transceiver is preset for a Power ON Password,
"PASSWORD" is displayed when turning ON the
transceiver�
In that case, enter the password.
1� Push the appropriate keys to enter numbers, as
described below�
Key
0 1
Number
5 6
2� After entering the correct password, the
transceiver automatically displays the Standby
screen�
NOTE: If the transceiver does not display the
Standby screen after entering the password, the
entered code may be incorrect� Turn OFF the
transceiver, then ON again to reenter the password.
[Down]
2 3 4
7 8 9
Standby screen (Example)
3-2
[Rotary Selector]
[VOL]