Sony DVP-NC650V Operating Instructions Manual page 88
Sacd/dvd player
Hide thumbs
Also See for DVP-NC650V:
- Operating instructions manual (106 pages) ,
- Service manual (39 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
xBALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set "TEST
TONE" to "ON" for easy adjustment.
The default adjustments are in parentheses.
FRONT
(0dB)
REAR (0dB) Adjust the balance between the
xLEVEL
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to
"ON" for easy adjustment.
The default adjustments are in parentheses.
FRONT (0dB)
CENTER
(0dB)
REAR (0dB)
SUBWOOFER
(0dB)
To adjust the volume of all the
speakers at one time
Use the amplifier's (receiver's) volume
control.
xTEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the "BALANCE" and "LEVEL."
OFF
88
Adjust the balance between the
front left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
rear left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
Adjust the level of the front
speakers (–6dB to 0dB, 0.5
dB increments).
Adjust the level of the center
speaker (–12dB to 0dB,
0.5dB increments).
Adjust the level of the rear
speakers (–12dB to 0dB,
0.5dB increments).
Adjust the level of the
subwoofer (–10dB to +10dB,
0.5dB increments).
The test tone is not emitted from
the speakers.
ON
The test tone is emitted from
each speaker in sequence while
adjusting balance or level.
When you select one of the
"SPEAKER SETUP" items, the
test tone is emitted from both left
and right speakers simultaneously.
Adjusting the speaker volume and
level
1
Select "SPEAKER SETUP" in the Setup
Display.
2
Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"BALANCE" or "LEVEL" and adjust the
value of "BALANCE" using C/c and
"LEVEL" using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set to "OFF" to
turn off the test tone.
Notes
• When you adjust the speaker settings, the sound cuts
off for a moment.
• The test tone signals are not output from the digital
jack.
Advertisement
Table of Contents
