Controlling Your Tv With The Supplied Remote - Sony DVP-K82P Operating Instructions Manual

Controlling Your TV with
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
TV
Number
buttons
You can control your TV using the buttons
below.
By pressing You can
TV [/1
Turn the TV on or off
2 (volume) +/– Adjust the volume of the TV
t (TV/video)
Switch the TV's input source
between the TV and other
input sources.
Note
Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
1
2 (volume) +/–
2
t (TV/video)
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer
Sony
Aiwa
Grundig
Hitachi
JVC
LG
Loewe
Panasonic
Philips
Samsung
Sanyo
Sharp
Thomson
Toshiba
• When you replace the batteries of the remote, the
• Depending on the connected unit, you may not be
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code (see the table
below).
Release TV [/1.
Code number
01 (default)
01 (default)
11
24
33
06
06
17, 49
06, 08
06, 71
25
29
43
38
Notes
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
able to control your TV using all or some of the
buttons on the supplied remote.
65