Table of Contents
Advertisement
If you are connecting to an S VIDEO input jack
B
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
If you are connecting to a monitor, projector, or AV amplifier
C
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel to output progressive signals. For details, see "Using
the PROGRESSIVE button" (page 17).
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 68.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal
or the Setup Display etc. in the NTSC colour system and the picture may not appear on the
PAL colour system televisions. In this case, open the tray and remove the disc.
16
Green
Blue
Red
CD/DVD player
Green
Blue
Red
VCR
Connect
directly
/C
, P
/C
)
B
B
R
R
TV
Advertisement
Table of Contents
