Utilize Sfc Programs (Replace Melsap-Ii With Melsap3) - Mitsubishi Electric Artisan MELSEC-Q Series Manual

7.4 Utilize SFC programs (Replace MELSAP-ΙΙ with MELSAP3)
7.4 Utilize SFC programs (Replace MELSAP-ΙΙ with MELSAP3)
Solution and Benefit
• The SFC program (MELSAP-ΙΙ) created in ACPU can be converted to QCPU SFC program
(MELSAP3) through "Change PLC type" in GX Developer. This program can be used without
further modifications.
• SFC program (MELSAP3) has the same specifications in QnACPU as in QCPU. Therefore, it is not
necessary to modify the program after executing "Change PLC type" in GX Developer.
• SFC programs (MELSAP-ΙΙ and MELSAP3) created with MS-DOS-compatible programming
software (SWIVD/NX-GPPA and SWIVD/NX-GPPQ) can be converted and utilized after being
imported to GX Developer.
This chapter explains how to replace SFC programs (MELSAP-ΙΙ) created in ACPU with SFC programs
(MELSAP3) for QCPU and the necessary modifications after the replacement.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
146