Table of Contents
Advertisement
F. GND tab
AUDIO OUT connector
18
Installing the Drive Unit in Your Computer
Connect the F. GND tab to one of the host computer's ground cables
unless the frame of the drive unit is in direct contact with the
computer's chassis (a situation not likely under normal
circumstances).
The frame ground cable recommended is the one using an AMP 1-
480435-0 housing and 170203-2 or 60711-1 contact.
The pin assignment is as follows:
F. GND tab
Frame ground cable
pin
1
2
3
4
Audio Signal
R singal
R ground
L ground
Lsignal
Advertisement
Table of Contents
