Getting Started; Unpacking; Inserting Batteries Into The Remote - Sony DAV-EA20 Operating Instructions Manual

Getting Started

Unpacking

Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• AM loop aerial (1)
• FM wire aerial (1)
• Video cord (1)
• Speaker cords (5m
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Foot pads (20)
• EURO AVadapter (1)
4, 15m 2)
Inserting Batteries into
the Remote
You can control the system using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the system.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Using the Remote
1 2
4 5
7 8
> 10
10/0
When you use the system, ensure that you have
the COMMAND MODE switch set to
SYSTEM. When setting to TV, you can control
the TV (page 51).
3
6
9
COMMAND
MODE switch
11 GB