Other Operations
Controlling TV with the
Supplied Remote
You can control your TV (Sony only) with the
supplied remote.
Controlling TVs with the
remote
TV/VIDEO
1
2
Number
4
5
buttons
7
8
> 10
10/0
VOL +/–
TV/CH –/+
You can control your TV using the buttons
below.
By pressing
You can
TV [/1
Turn the TV on or off.
TV/VIDEO
Switch the TV's input source
between the TV and other input
sources.
Switching between TV and DVD
Using the COMMAND MODE DVD/TV
switch, you can switch the remote signal
between control of the TV and control of the
DVD unit. When you watch the DVD, ensure
that you have the COMMAND MODE DVD/
TV switch set to DVD.
The table below shows the buttons that are
affected by the COMMAND MODE DVD/TV
switch.
TV ?/1
3
6
9
ENTER
COMMAND
MODE
switch
Button
TV
1~9, 10/0
Selects the TV Channels.
(1-10 CH)
.
TV CH –*
>
TV CH +*
3
VOL +
#
VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use for selecting the channel number greater than
10.
Tip
Depending on the TV manufacture, the following
method works. For double-digit number, press
-/-- first and then number. (For example, for channel
25, press -/--, then 2 and 5.)
51
GB