Sony BDP-S1 Manual Addendum: Audio Codec Information (firmware ver 2.0 or higher) Operating Instructions Manual page 27

Items
Options (
POWER SAVE

(Saving power)
PLAY ORDER TRACK
1)
(Playback order)
GROUP
CD-EXTRA
1) 4)

(Playback by disc
format)
1)You can set this up only while the player is stopped.
2)AVLS is an abbreviation of the Automatic Volume Limiter System.
3)This function works only for ATRAC CDs.
4)This function works only for Audio CDs and CD-Extra CDs.
Notes
• Even if "G-PROTECTION" is set to "2," sound may skip:
– when the CD player receives stronger continuous shock than expected,
– when a dirty or scratched CD is played, or
– for CD-Rs/CD-RWs, when a poor-quality disc is played or there is a problem with the original recording
device or application software.
• Even if "SEAMLESS" is set to "ON," the tracks may not play continuously depending on how the source
music was recorded.
: Default settings)

The POWER SAVE function does not work.
OFF
ON Setting of the SOUND items is not effective.

NORMAL
ID3TAG TNO
FILE NAME

OFF
ON
Set to "OFF" as long as you can play your CD normally.
OFF
ON If you cannot play your CD-Extra, set to "ON." You may play it.
Play back the music source in the order of
recording.
Play back in the order of ID3 tag number.
Play back in the alphabetical order of the
file names.
Play back the music source in the order of
recording.
Play back the music source in the order of
group names.
27