Sony MVC-FD92 Operating Instructions (primary manual) Operating Instructions Manual page 31

xViewing images
For Windows 98, Windows 98SE, Windows Me and Windows
2000 Professional users
Turn on the power of your computer and allow Windows to load.
1
Connect one end of the supplied USB cable to the USB jack (mini-
2
B) on the camera and the other end to the USB connector on your
computer.
Computer
3 Insert a floppy disk or "Memory Stick" into your camera, and set
the MS/FD selector to the appropriate position according to the
media inserted.
Connect the AC power adaptor to your camera and then to a wall
4
outlet (mains) and turn on the power of your camera.
"USB MODE" appears on the LCD screen of the camera.
Open "My Computer" on Windows and double-click the newly
5
recognized drive, "Removable Disk"(Example (D:) ).
The folders inside the floppy disk or "Memory Stick" are displayed.
If the drive is not recognized properly, see "Troubleshooting" on page 77.
Drive identifier depends on your computer.
To the USB
connector
To the USB
jack
Push the connector
as far as it will go
USB cable
31