Self-Diagnosis Display - Sony CD Mavica MVC-CD350 Operating Instructions Manual

Self-diagnosis display

– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
C:32:ss
Self-diagnosis display
98
Code Cause
C:32: ss
There is trouble with your
camera's hardware.
C:13: ss The camera cannot read or write
data on the disc.
The inserted disc cannot be used
with your camera, or the data is
damaged.
E:61: ss A camera malfunction that you
E:91: ss cannot reverse has occurred.
If you are unable to solve the problem even
after trying the corrective actions a few
times, contact your Sony dealer or local
authorized Sony service facility and inform
them of the 5-digit code.
Corrective action
• Turn the power off and on again
(page 15).
• Clean the disc when the disc is dirty
(page 108).
• Insert a new disc (page 18).
• Press the RESET button (page 88) located
on the bottom of the camera, then turn on
the power again.