Sony CD Mavica MVC-CD350 Operating Instructions Manual page 95

Others
Symptom
Your camera does not
work.
The power is on, but the
camera does not work.
You cannot identify an
indicator on the screen.
The lens gets fogged.
A file error occurs when
you play back a file.
Cause
• You are not using an "InfoLITHIUM" battery
pack.
• The battery level is low. (The E indicator
appears.)
• The AC Adaptor is not connected securely.
• The built-in microcomputer is not working
properly.
—
• Moisture condensation has occurred.
• The image file has an error.
• The image was not recorded correctly.
• The disc is dirty
• The disc may be scratched.
Solution
p Use an "InfoLITHIUM" battery pack (page 109).
p Charge the battery pack (page 11).
p Connect it securely to the DC IN jack of your camera and to a
wall outlet (page 14).
p Disconnect, and then, after one minute, reconnect all power
sources and turn on the camera. If this does not work, press the
RESET button on the bottom of the camera using a fine-tipped
object, then turn on the power again. (All the settings including
date and time are cleared.)
p Check the indicator (page 113).
p Turn off the camera and leave for about an hour at room
temperature for the moisture to evaporate before use (page 108).
—
—
p Clean the disc (page 108).
p Replace the disc.
95