Table of Contents
Advertisement
2. Slacken the lamp fixing nut using
a box spanner or socket.
3. Manually unscrew and remove
the lamp fixing nut.
4. Disengage the retaining clip,
while pushing the light assembly
out slightly.
5. From the outside, carefully
withdraw light assembly from
recess and remove. Take care
that the cable duct remains in
position.
6. Turn the bulb socket
anticlockwise and remove it from
the light assembly.
7. Detach the bulb from the bulb
socket and replace the bulb:
Reverse light (1)
Vehicle care
Rear fog light (2)
8. Insert the bulb socket into the light
assembly. Fit the light assembly in
the recess and tighten the lamp
fixing nut from the inside. Attach
the cover.
Centre high-mounted brake light
The centre high-mounted brake light
is designed as LED and can not be
changed.
Have lights repaired by a workshop in
case of failure.
Bulb check
Switch on the ignition, operate and
check all lights.
213
Advertisement
Chapters
Table of Contents
