Audio Settings; Display Settings - PURE Pop Midi Manual

Audio settings

You can use Pop's audio menu to adjust the bass and treble.
1. Press the Menu button.
2. Scroll < > to 'Audio' and press the Select button.
3. Scroll < > to 'Bass' or 'Treble' and press the Select button.
4. Scroll < > to adjust the bass or treble levels. You can choose a level between
'-3' and '+3'.
5. Press the Select button to confirm the bass or treble level.

Display settings

Adjusting the display brightness
You can adjust the brightness of the display when Pop is switched on or in
standby. To change the brightness of Pop's display:
1. Press the Menu button.
2. Scroll < > to 'Display' and press the Select button.
3. Scroll < > to 'Backlight' and press the Select button.
4. Scroll < > to 'Active' and press the Select button to change the settings that
apply when Pop is switched on, or scroll to < > 'Standby' and press the Select
button to change settings that apply in standby.
5. Scroll < > to 'Level' and press the Select button.
6. Scroll < > to choose a brightness level between '1' and '5'.
7. Press the Select button to confirm the brightness setting.
Adjusting how long the display backlight stays on for
You can adjust how long Pop's display backlight stays on for:
1. Press the Menu button.
2. Scroll < > to 'Display' and press the Select button.
3. Scroll < > to 'Backlight' and press the Select button.
4. Scroll < > to 'Active' and press the Select button to change the settings that
apply when Pop is switched on, or scroll to < > 'Standby' and press the Select
button to change settings that apply in standby.
5. Scroll < > to 'Duration' and press the Select button.
6. Scroll < > and press the Select button to choose one of the following options:
On: Choose this option if you want the backlight to always stay on.
Off: Choose this option if you want the backlight to turn off after 10 seconds
EN
15