Sony DSLR-A100 User's Manual / Troubleshooting page 135

• Disconnect and connect the USB cable again. If an error message is indicated on the printer,
rel_:r to the operating instructions supplied with the printer.
Cannot print images.
• Check that the camera and tile printer arc propcrl} connected using the USB cable.
• Turn on the printer. For furfller inlormation_ rel_:r to the operating instructions supplied with
the printer.
• RAW data files cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may
not be printed.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to _hether
the printer provides these fimctions or not.
• The date may not be inserted ill the index mode depending on the printer. Consult the printer
n/anu hlcttlreE
" is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed _ith the date inserlcd. Set [Data
print] to [Off] and print the image again lpage 126).
Cannot select the print size.
• Consult the printer manulacmrcr as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect tile USB cable and reconnect it x_hcne_cr you change the paper size after the
printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 126) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a _ lille as the printer is carrying out the cancellation. It may take some time
depending on the printer.
135