Sony DSLR-A100 User's Manual / Troubleshooting page 104

For detai/son the operation _ page 80
• When cleaning the CCD, do not put the tip of a blower brush into the cavity
beyond the lens mount, You do not need to put the blower brush close to the
CCD.
(_) Attach the lens and set the POWER s_xitch to OFF.
• The camera starts beeping if the baiteD' pack becomes low during cleaning. Stop the cleaning immedialely
and sel the POWER switch 1o OFE
"_" To keep dust from entering the camera
While il is impossible to completely shul out dust, tile lollowing reminders should help lower tile possibilily.
• Choose a location wilh lillle dusl 1£_ change the lens. and complele lhe operation quickly.
• Do nol leave lhe camera without a lens or tile body cap.
• When atlaching tile body cap. remove all lhe dust honl lhe cap belkll-e placing il on lhe camera.
You
Call reset the
mailt ftlnctions of
the camera.
(_) Select [Enter] in [Reset default].
The message "Reset default?" appears.
(_ Select [Yes] with _1 on the controller, then press the center of the controller.
The main lhnctions are rescl.
• For details on the items to be resel, see "Resel del_mll" (page 151 ).
104