Installing "Image Transfer - Sony DSC-U50 Operating Instructions (primary manual) Operating Instructions Manual

Installing "Image Transfer"

You can use the "Image Transfer" software
to copy images to your computer
automatically when you connect the camera
to your computer with the supplied USB
cable.
a Click [Cyber-shot] on the
model selection screen.
The installing menu screen appears.
b Click [Image Transfer] on the
installing menu screen.
Select the desired language,
then click [OK].
The "Welcome to the InstallShield
Wizard" screen appears.
• This section describes the English screen.
c Click [Next]. When the
"Licence Agreement" screen
appears, click [Yes].
Read the agreement carefully. If you
accept the terms of the agreement,
proceed with the installation. The
"Information" screen appears.
d Click [Next].
e Select the folder to be
installed, then click [Next].
Select the program folder, then
click [Next].
f Confirm that the checkbox is
checked on the "Image
Transfer Settings" screen,
then click [Next].
When the installation is completed, the
screen informs you of completion.
55