Shooting Still Images; Inserting And Removing A "Memory Stick Duo - Sony DSC-U50 Operating Instructions (primary manual) Operating Instructions Manual

Inserting and removing a "Memory Stick Duo"

Access lamp
1
, Open the battery/"Memory
Stick Duo" cover.
Hold the camera with the battery/"Memory
Stick Duo" cover up, then slide the cover in
the direction of the arrow 1 while pressing
OPEN. The battery/"Memory Stick Duo"
cover opens in the direction of the arrow 2.
• When the access lamp is lit up, it means
that image data is being read or written.
Never open the battery/"Memory Stick
Duo" cover or turn off the power at this
time, as the data may be damaged.
• For details on the "Memory Stick Duo," see
page 82.

Shooting still images

2
, Insert the "Memory Stick Duo."
Holding the "Memory Stick Duo" as shown
in the illustration, insert it all the way in
until it clicks.
• Push the "Memory Stick Duo" all of the way in
so that it is securely seated in the connector. If
the "Memory Stick Duo" is not inserted
correctly, you may not be able to record or
display images in the "Memory Stick Duo."
• Be careful not to drop the batteries when
opening or closing the battery/"Memory Stick
Duo" cover.
Terminal
side
3
, Close the battery/"Memory
Stick Duo" cover.
To remove a "Memory Stick Duo"
Open the battery/"Memory Stick Duo"
cover, then push the "Memory Stick Duo"
to pop it out.
17