Sony DSC-T300 Cyber-shot&reg Handbook page 134

Warning indicators and messages
Invalid operation
You have touched the panel when using
•
the digital zoom or Close focus enabled
mode. While using these modes, you
cannot focus by touching the screen.
Unable to detect face for retouch
You may not be able to retouch the
•
image depending on the image.
(Vibration warning indicator)
Camera shake may occur due to
•
insufficient light. Use the flash, turn on
the anti-blur function, or mount the
camera on a tripod to secure the camera.
640(Fine) is not available
[640(Fine)] size movies can be recorded
•
only using a "Memory Stick PRO Duo".
Insert a "Memory Stick PRO Duo" or
set the image size to a size other than
[640(Fine)].
Macro is invalid
The macro is unavailable under the
•
current settings (page 43).
Flash settings cannot be changed
The flash is unavailable under the
•
current settings (page 43).
Zoom disabled
[Digital Zoom] is set to [Off] when you
•
are shooting in
enabled) mode. Or, you are trying to use
[Smart] in [Digital Zoom] when the
image size is set to [10M], [3:2(8M)] or
[16:9(7M)] (page 90).
134
(Close focus
Maximum number of
images already selected
Up to 100 files can be selected when
•
using [Multiple Images].
Up to 999 files can be selected when
•
using [All Images in Date Range], [All
In This Folder] or [All In Favorites].
Up to 999 files can be registered as
•
Favorites, and you can add
marks to up to 999 files.
Cancel the selection.
Low battery power
When copying a image recorded in the
•
internal memory to the "Memory Stick
Duo", use a fully charged battery.
Printer busy
Paper error
No paper
Ink error
Low ink
No ink
Check the printer.
•
Printer error
Check the printer.
•
Check if the image you want to print is
•
corrupted.
The data transmission to the printer may
•
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing...
The printer is canceling the current print
•
job. You cannot print until it is finished.
This may take time, depending on the
printer.
or