Troubleshooting
Cannot insert dates on images.
This camera does not have a feature for superimposing dates on images (page 129). By using
•
"Picture Motion Browser", you can print or save images with the date (page 102).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 51).
•
The screen is too dark or too bright.
Adjust the brightness of the backlight (page 22).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 49) or adjust the exposure (page 51).
The image is too bright.
Adjust the exposure (page 51).
•
The image colors are not correct.
Set [Color Mode] to [Normal] (page 61).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on
•
the image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [Auto] or [On] (page 60).
•
•
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
•
Retouch the image using [Red Eye Correction] (page 69).
•
124