Troubleshooting
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
•
terminal.
Turn on the printer. For further information, refer to the operating instructions supplied with
•
the printer.
If you select [Exit] during printing, images may not be printed. Disconnect and connect the
•
cable for multi-use terminal again. If you still cannot print your images, disconnect the cable
for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
Movies cannot be printed.
•
Images shot using cameras other than the camera or images modified with a computer may
•
not be printed.
Printing is canceled.
Confirm that you have disconnected the cable for multi-use terminal before the
•
(PictBridge Connecting) mark disappears.
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
•
manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off]
•
and print the image again (page 97).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
When you use paper of a different size after connecting the printer to the camera, disconnect
•
and then reconnect the cable for multi-use terminal.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 97) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
109