Message
FAIL TO CERTIFICATE
INPUT THE SAME LETTERS INTO
THE DEVICE TO BE CONNECTED
AND THIS DEVICE
COMMUNICATIONS ERROR
UNABLE TO CONNECT
ENABLE THE RECEIVER
UNABLE TO CONNECT
ENABLE PRINTER TO RECEIVE
NOT ENOUGH MEMORY
NOT ENOUGH MEMORY
ENABLE THE RECEIVER
ENABLE PRINTER TO RECEIVE
NO RECORD FOR CONNECTED DEVICE
TRY A NEW SEARCH
30
Meaning/ Corrective Action
• The connection failed because a wrong passkey was entered. Enter the same passkey both on the
camera and on the device you intend to connect to (page 17).
• Communication error occurred. Connect again.
• The desired device cannot be discovered because the device is turned off, is too far away to be
discovered, or other reasons.
• The file size of the selected image is too large.
• The camera could not discover the desired device. Set the device to be connectable.
• There is no record. Perform a new search (page 7).