Partial Scan Mode - Sony DFW-SX900 Technical Manual

FUNCTIONS

Partial Scan Mode

The partial scan mode is a function for outputting part of the full images a region of interest on the whole image.
When the screen size needs to be set to the full size (DFW-SX900: SXGA, DFW-X700: XGA), data volume and system load
can be decreased by setting the required screen size using the partial scan mode (Format_7).
Horizontal (Horizontal Direction)
Cutting size
Images can be cut only in rectangular shapes (including squares) and not with irregular features (convex and concave).
Minimum unit size is shown in the table below. Minimum unit sizes can be combined and cut out together. The position of
each unit can be specified but should not exceed the full size of the screen.
Note) This function can be used in both the normal mode and external trigger mode.
The frame rate is the same as the normal rate.
Minimum Unit Size for DFW-SX900
Camera Horizontal Size
DFW-SX900 320
DFW-X700 512
Minimum Unit Size
Cutting by partial scan mode
Vertical Size
240
192
Minimum Unit Size for DFW-X700
DFW-SX900
DFW-X700
19