Sony Cyber-shot DSC-U20 Operating Instructions Manual page 27

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-U20:
Table of Contents

Advertisement

3
, Press and hold the shutter button
halfway down.
The beep sounds but the image is not yet recorded.
When the AE/AF lock indicator changes from flashing
to lighted up, the camera is ready for shooting.
• If you release the shutter button, the recording will be
canceled.
• The minimum focal distance to the subject is 10 cm
(4 inches).
1632
1632
1632
23
Flashes green
t Lights up
4
, Press the shutter button fully down.
The beep sounds. "RECORDING" appears on the LCD
screen, and the image will be recorded in the "Memory
Stick." When "RECORDING" disappears, you can
shoot the next image.
• When operating the camera using batteries, if you do not
operate the camera for about three minutes during recording
or playback, the camera turns off automatically to prevent
wearing down the batteries (page 19).
• Depending on the subject and the recording conditions, the
message "SHOOT AGAIN" may on very rare occasions
appear while recording a still image. If this message appears,
simply press the shutter button again. The camera performs
the appropriate compensation processing and records the
image.
1632
1632
1632
RECORDING
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc u20 - cyber-shot 2mp digital camera

Table of Contents