Sony Cyber-shot DSC-U30 Operating Instructions Manual page 65

Others
Symptom
Your camera does not work.
The power is on, but the
camera does not work.
You cannot identify an
indicator on the LCD screen.
The lens gets fogged.
Cause
• The battery level is low. (The E indicator
appears.)
• The USB cable is connected.
• The built-in microcomputer is not working
properly.
—
• Moisture condensation has occurred.
Solution
p Charge the batteries (page 10).
p Disconnect the USB cable (pages 52 and 57).
p Remove the batteries, then install them again after about one
minute and turn on the camera. If the functions still do not work,
press the RESET button located on the bottom of the camera
a fine-tipped object, then turn the power on again (page 59). (If
you press the RESET button, all settings including the date and
time are cleared.)
p Check the indicator (pages 78 and 79).
p Turn off the camera and leave it for about an hour at the room
temperature for the moisture to evaporate before use (page 72).
using
65