Cleaning And Care; Housing - Miele DAR 1125 Operating And Installation Instructions

Cleaning and care


Before proceeding with any
maintenance or cleaning task, the
cooker hood must be disconnected
from the power supply, see "Warning
and safety instructions".

Housing

General information
The surfaces and controls are sus-
ceptible to scratches and abrasion.
Please observe the following clean-
ing instructions.
 All external surfaces and controls can
be cleaned using hot water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
Make sure that water does not get
into the cooker hood.
Only clean the area of the controls
with a damp cloth.
 Then wipe the surfaces dry using a
soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents.
18
Important for appliances with stain-
less steel surfaces
 Stainless steel surfaces can be
cleaned with a proprietary non-abras-
ive cleaning agent designed specific-
ally for use on stainless steel.
 To help prevent re-soiling, a propriet-
ary conditioning agent for stainless
steel (available from Miele) can also
be used. Follow the manufacturer's
instructions on the packaging.
Important for the controls
Do not leave soiling on the controls
for any length of time.
Otherwise they may suffer discolour-
ation or damage.
Remove soiling straight away.
 Please observe the general notes on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.