Kawai CN29 Owner's Manual page 13

a POWER button
This button is used to turn the CN29 digital piano on/off.
Be sure to turn off the instrument after playing.
b MASTER VOLUME slider
This slider controls the master volume level of the CN29 digital
piano's built-in speakers or headphones, if connected.
c OLED Display
The OLED display provides useful information such as the
currently selected sound name, settings values, and the status
of other functions when active. An example of the main play
screen is shown below.
Transpose status
Bluetooth
status
Selected
sound
Function #1
* A protective plastic film is attached to the display during production.
Please remove this film before attempting to play the instrument.
de FUNCTION buttons
These buttons are used to select functions/options shown at
the bottom of the display An example is shown below.
f REC button
This button is used to record performances to the CN29 digital
piano's internal memory.
g PLAY / STOP button
This button is used to start/stop the playback of Recorder songs
stored in memory and CN29 digital piano's built-in Lessons
songs.
Scrollbar
Function #2
hi UP / DOWN button
These buttons are used cycle through sounds, navigate through
menus, and adjust values.
j METRONOME button
This button is used to turn the metronome function on/off, and
also to adjust its tempo, time signature, and volume settings.
k SOUND SELECT button
This button is used to select the sound(s) that will be heard
when the keys are pressed.
Pressing both the [METRONOME] and [SOUND SELECT] buttons
simultaneously will activate DUAL mode, allowing two different
voices to be played together.
l PEDAL connector
This connector is used to connect the CN29 digital piano's pedal
board to the instrument.
m DC IN jack
This jack is used to connect the AC adaptor.
n USB to Host port
This port is use to connect the instrument to a computer using
a USB 'B to A' type cable in order to send and receive MIDI data.
o MIDI IN / OUT jacks
These jacks are used to connect the CN29 digital piano to
external MIDI devices, such as other musical instruments or a
computer, in order to send and receive MIDI data.
p PHONES jacks
These jacks are used to connect stereo headphones to the
CN29 digital piano. 1/4" and 1/8" connectors are provided for
convenience, and both can be used simultaneously, allowing
two pairs of headphones to be connected at the same time.
13