Maintenance; Tool Lubrication - Bosch GSB18V-535C Operating And Safety Instructions Manual

2610045250.qxp_GSB18V-535C 6/20/18 10:26 AM Page 18
maintenance performed by un au thorized
personnel may result in misplacing of
internal wires and components which could
cause serious hazard. We recom mend that all
tool service be performed by a Bosch Factory
Service Center or Authorized Bosch Service
Station. SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
BATTERIES
Be alert for battery packs that are nearing
their end of life. If you notice decreased tool
performance or significantly shorter running time
between charges then it is time to replace the
battery pack. Failure to do so can cause the
tool to operate improperly or damage the
charger.

TOOL LUBRICATION

Your Bosch tool has been properly lubricated
and is ready for use.
(* = standard equipment)
(** = optional accessories)
18

Maintenance

Service
NO USER SERVICEABLE
PARTS INSIDE. Preventive
Accessories
SAVE THESE INSTRUCTIONS
D.C. MOTORS
The motor in your tool has been engineered for
many hours of dependable service. To maintain
peak efficiency of the motor, we recommend it
be examined every six months. Only a genuine
Bosch replacement motor specially designed for
your tool should be used.
Cleaning
To avoid accidents, always
disconnect the tool and/or
charger from the power supply before
cleaning. The tool may be cleaned most
effectively with com pressed dry air. Always
wear safety goggles when cleaning tools
with compressed air.
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through opening.
Certain cleaning agents
and
plastic parts. Some of these are: gasoline, car -
bon tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents that contain
ammonia.
* Screwdriver bit
* Carrying case
solvents damage