Sony WEGA KV 27FV300 Operating Instructions Manual page 23

Operating Instructions
Connecting a TV and Satellite Receiver
Satellite Receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
You can use the
For better picture quality, use S VIDEO instead of the yellow audio/video cable. S VIDEO does not
provide sound; you still must connect the audio cables.
16
From
cable/
antenna
2
3
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
1 3 4
Video (yellow)
Audio L (white)
Audio R (red)