Sony WEGA KV 27FV300 Operating Instructions Manual page 14

Inside Panel
1
2
3
4
5
Button Description
1 TV/VCR Press to switch between TV and VCR mode. If you have
a non-Sony VCR, you will need to program the remote
control to recognize your VCR. For details, see
"Programming the Remote Control" on page 49.
2 VCR (operating) Operates your VCR. The VCR must be programmed
into the remote control. For instructions, see
"Programming the Remote Control" on page 49.
m Rewind.
6
REC Press the
at the same time to record any programs with your VCR
(the remote control must be programmed in order to use
REC.)
M Fast-forward.
N Play.
x Stop.
Pause. Press again to resume normal playback.
X
3 Press to display the DVD's menu.
DVD MENU
4 TITLE Press to display the DVD's Title menu.
5 PIP (Picture in Press to operate PIP feature. See "Using Picture in
Picture) Picture (PIP) with Remote Y182" on page 26.
6 Press to cycle through the Multi-channel TV Sound
MTS/SAP
(MTS) options: Stereo, Auto SAP (Second Audio
Programming), and Mono.
Introduction
button and the blank button - above, left -
7